dose someone with the tools have time tomorrow of Saturday to help me install new shocks? i was going to do it when i did the lift but the bolt on the passenger side is rounded off so i couldnt get the nut off, a 12 pack of your beer of choice for the help?
03-23-2012 08:53 AM
If you can't find any closer help, you can bring it up here Saturday afternoon. Should be able to get them loose. Swearing a lot helps...
Oh yeah, soak all the bolts with penetrating oil today. That will help.
03-23-2012 02:01 PM
Thanks Ed, all te guys I work with when up to Breckinridge or something for te 4 day weekend so looks like I'll take up the offer. On my way to go get the blaster, some torx bits and stuff for home made discos
03-23-2012 06:01 PM
Ok, sounds good. We'll set something up tomorrow morning, probably meet up at the McD's in woodland park. That would be way easier than the screwball directions I'd have to give you :)
03-23-2012 06:51 PM
awesome. do you have a torx set so i can undo the sway bar bolt to put in the hardware for the discos? if not i can wait and get into the autocraft center on post. i think its a 50 or 55
03-23-2012 07:00 PM
Yeah, I should have one since I got mine off, replaced them with hex bolts.
03-23-2012 07:03 PM
awesome. now i just hope that its as simple as ive read, unbolt and replace... but last time i dried that it was far from that easy
03-23-2012 07:09 PM
Nothing is ever simple on a Jeep...
03-23-2012 07:18 PM
im about to go hit the bolts with blaster for the 3rd time so hoping that helps
03-23-2012 07:21 PM
That always helps :thumb:
03-23-2012 11:22 PM
What time you thinking? 10ish work?
03-23-2012 11:31 PM
I was thinking more like 1:00 if you can live with that, I'm not even coherent at 10:00.
03-23-2012 11:37 PM
lol that good to. i normally only get to sleep in one day a week and i have a 4day so im not used to being able to do it 2 days in a row.
03-24-2012 10:23 AM
Hope you're getting to sleep in :-) I'll meet you at the McD's in WP at 1:00