Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Tj flares on a yj (http://www.wranglerforum.com/f218/tj-flares-on-a-yj-148340.html)

greenhead17 03-23-2012 10:06 AM

Tj flares on a yj
 
MY buddy was wondering if you could fit a set of tj flares on a yj. And is there anything we may not know about fitment

Beachcruiser 03-23-2012 10:29 AM

Very popular mod. Have to drill a few new holes, but pretty straight forward. Allows you to trim a bit of fender for @ an extra inch or so of tire clearance.

greenhead17 03-25-2012 10:34 AM

Thanks. I let him know and thats the route he is going.

NHrubicon 03-25-2012 10:42 AM

We had a YJ (94) rebuilt and modified a couple years ago-and I had Xenon flares for TJ mounted on the YJ with no problem. New holes needed of course but use stainless steel bolts and you'll never have a problem taking them off. Found out the hard way-son just removed the Xenons on my rubicon we had installed 5 years ago-and only bolts he didn't have to cut off were the stainless steel ones. Flat fenders he's building for me now will have all stainless steel bolts...

rykemc 03-25-2012 11:08 AM

Not meaning to hijack your thread, but I am planning on doing this myself.
I need new tires and want to run 33x12.5 tires. Right now I have 31x10.5
I do have a 2 1/2 lift and no tire clearance problems with the 31's right now.
Question is, after installing and trimming the wheel well out can I go ahead and
run the 33's until I get my bigger lift installed?

NHrubicon 03-26-2012 07:34 AM

You shouldn't have any problems-I ran 31x10.5x15 with nothing more than 2" budget boost for a couple years. Then I put in a 4" lift and went to the 33x12.5x15 and have had no problems. As long as you have bumpstops and don't really 'stuff' a tire you shouldn't be worried. When my flat fenders are installed my son is trimming back the edge of the tub so I can go up to 35" when my 33's go bare.

wvhillbilly 03-26-2012 09:21 AM

you lookin to buy a set? got a set for a good price if ya want them!


All times are GMT -5. The time now is 02:52 AM.