Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Dana 35 axle tag? (http://www.wranglerforum.com/f210/dana-35-axle-tag-14846.html)

dbwvu 01-16-2008 11:04 PM

Dana 35 axle tag?
 
does the axle tag on my dana 35 have the actual gear ratio or do i have to decode it? these are the #s located under the DANA symbol on thr rear of the rear axle 43225 is this even the correct place to look?
282 6
6/6/96 datebuilt ?

thanks, db

Triple88a 01-16-2008 11:14 PM

yeah it should say the ratio, i believe it should be on the left side of the tag.

should say something like 3.07 or 3.55 or 3.73 or something like that. maybe 4.11

That is what you will have unless the previous owner replaced the gears inside and did not change the tag.

distortedtj 01-16-2008 11:26 PM

the tag is held on buy one/two of the diff cover bolts.

mrbigjeep 01-17-2008 10:47 AM

it has the gear ratio on it.

the tag will look like this...and the ratio will be listed just as pictured (but it could be 3.55 or 3.73 or 3.07 or even 4.10 if you have a 4cyl)

http://i121.photobucket.com/albums/o...dana35diff.jpg

solo97tj 01-17-2008 05:22 PM

give me your vin # and i will tell you what is your gear ratio


All times are GMT -5. The time now is 10:39 AM.