Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Need a dimension on a 1" body lift (http://www.wranglerforum.com/f218/need-a-dimension-on-a-1-body-lift-148557.html)

Copperhead 03-24-2012 07:49 AM

Need a dimension on a 1" body lift
 
For the guys and gals that have a 1" body lift on their YJ, can you tell me what the distance is from the top of the frame to the bottom of the body, where the spacer contacts the body? I'm assuming its more than 1", but I need to know the real world dimension. Thanks!!

Master4th 03-24-2012 11:38 AM

Just measure your current spacing then add 1 inch. My rear is 3/4" and side mounts are 1" thick. My mounts are all stock.

Copperhead 03-24-2012 11:49 AM

Quote:

Originally Posted by Master4th (Post 2176452)
Just measure your current spacing then add 1 inch. My rear is 3/4" and side mounts are 1" thick. My mounts are all stock.

Thanks. I would do that, except I'm in the bare frame stage of a frame-off build. Before I build my fuel cell mount, I need decide on a height, to make sure the fuel fittings on top will clear the bottom of the tub.http://hemiduster.com/fuelcell2.jpg

Master4th 03-24-2012 12:02 PM

Very Nice,
Just from some rough measurements it looks like the top of my gas tank is 2" below the highest point of the frame. The cargo area of the body measures a rough 1" from this same point.

I don't know if these references can help.


All times are GMT -5. The time now is 02:43 AM.