Hey every one. I'm rebuilding a yj. (of which I'm taking plenty of pics for a new build thread) but anyways I had it tore down to the chassis and have since put it back togather. We had four guys working on it during the tear down and now we have a bracket left and don't know where it goes haha. Here's a pic if yall know please tell me haha.
03-25-2012 08:29 PM
I should mention that I pretty much have the jeep back togather and still can't figure out where it goes. I even looked at my buddys yj and couldn't find it
04-02-2012 06:41 PM
Sorry, I don't know.....but I can send it back to the top!
04-02-2012 09:08 PM
I was an auto mechanic and paint and body tech for 25 years and with the elongated holes the only place on a car or truck i have seen these are on the steering column. I would pull the instrument panel on my yj to see but it is raining and the yj is my wet weather vehicle. Hope this helps.
04-03-2012 01:37 PM
Ok. I will definently look into it. The colom has been in and is strong buy ill see if it'll fit anywhere