Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Help! front sway bar (http://www.wranglerforum.com/f282/help-front-sway-bar-150275.html)

Skol-Vikes 03-31-2012 02:22 PM

Help! front sway bar
 
When you take your quick Disconnect rods off, do your front sway bars stay in place or do they swing down. How do you get them to stay up in place?

Thanks

wavebacktothetj 03-31-2012 02:37 PM

Zip ties :thumb: dont let them hang they could get damaged

Skol-Vikes 03-31-2012 04:26 PM

All good thanks!

Jerry Bransford 03-31-2012 04:27 PM

Yep zip ties or bungee cords. Look on your front coil's upper mount, you'll see a very convenient gap where it is welded to the frame for passing a zip tie or bungee cord through for holding it up.

Raif 03-31-2012 08:28 PM

My setup consists of:
Clevis pin disconnect.
http://i417.photobucket.com/albums/p...o/IMAG0224.jpg
Two zip-ties, one through the truss in between the body, and fender. One hanging from the first zip tie.
http://i417.photobucket.com/albums/p...o/IMAG0223.jpg
One zip tie around the sway bar, and a carabiner to connect the two together. (the swaybar link folds up alongside the swaybar. It doesn't seem to want to fall.)
http://i417.photobucket.com/albums/p...o/IMAG0222.jpg


All times are GMT -5. The time now is 03:32 AM.