Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Transmission Cross member (http://www.wranglerforum.com/f282/transmission-cross-member-150813.html)

The Ugly Jeep 04-02-2012 06:37 PM

Transmission Cross member
 
Short story long....
I have a 97 TJ 2.5L. Installed a transfer case drop when I lifted it. :banghead:
Smashed it good....bent the mounting bolts to the point where one of them snapped. Plate looks bent to the point that when i remove the drop kit to add my SYE, it will not bolt up flat to the frame. Do any companies make a replacement that can take more of a beating than the stock design, without me needing to add a body lift?

HarryJeepGuy 04-02-2012 07:23 PM

Look up UCF (Under Cover Fab). They have options on thickness, Steel or Aluminum, body lift or none.

The Ugly Jeep 04-02-2012 10:02 PM

Thanks. I'll check that out.


All times are GMT -5. The time now is 11:05 AM.