Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   which body lift? (

Tdad 04-06-2006 08:09 PM

which body lift?
Looks like I'm going ot be adding a 1" body lift to clear the 32's I just put on. I've heard lots of good things about the Performance Accessories kit, and it's the least expensive one I've seen. But, my question is: would it be better to use a kit like the Daystar which replaces the stock mount, instead of one that stacks on top (like all the others)?
Or, doesn't it really matter?
Would be interested to know which BL you guys might be using and you opinions on it (including ease of installation).

Moab Man 04-06-2006 10:42 PM

We use the M.O.R.E. body lifts because they are aluminum pucks. No plastic to possibly crack, although I really haven't seen this to be much of an issue.

JeepCrawler98 04-07-2006 09:27 PM

Best would be to replace your body mounts with aftermarket polyurethane bushings with an aluminum puck on top, then a body lift that has a FULL replacement of the body mount as part of the install (one where the bodybushings are made 1" longer entirely); next best would be spacing them out with AL pucks, then the plastic ones - which crack pretty easily under impact loads (I've split a few playing redneck golf in the backyard). I don't like body lifts - I'll leave it at that; I've destroyed my stock unlifted body bushings and body mounts in the tub before so I don't think it's on my plate. But if you're gonna do it - go with the full replacement poly's, or a stock replacement poly mount set with aluminum pucks; the stock rubber bushings pull out pretty easy when you use your rocker guards a lot, which only gets worse if you space things out.

All times are GMT -5. The time now is 12:27 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.