Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   Stock Suspension??!?!?! (

BUSHKILLJEEP 04-05-2012 05:23 AM

Stock Suspension??!?!?!
I just recently bought a 2000 Jeep Wrangler Sport.The jeep sits up higher then other stock jeeps, I was wondering if this is a stock suspension " for a sport" or after market..

When i drive it down the road average speed is 45-50 mph when I hit a hole or uneven roads its a THUD sound.I am coming from a 2008 Dodge Ram big horn so the ride is definitley diffrent and i am aware of this..

Any ideas? Are the shocks worn out or is this just the ride? Either way im in love with my new ride..


Neil F. 04-05-2012 06:24 AM

We can't say anything without pictures

Jeeplover1 04-05-2012 06:26 AM


Originally Posted by Neil F. (Post 2222090)
We can't say anything without pictures

He is right its a LAW:wavey:

kjeeper10 04-05-2012 06:33 AM

4351 Attachment(s)
Lol..... Thud could be a bunch of things.

Suspension component/bushing. Body mount?

TJDave 04-05-2012 06:37 AM

It looks to me like your suspension is...........

wait for it..............


Originally Posted by Neil F. (Post 2222090)
We can't say anything without pictures


BUSHKILLJEEP 04-05-2012 06:56 AM

1 Attachment(s)
Hope this worked....

TJDave 04-05-2012 07:08 AM

^ There it is!
From what I can tell from that pic...Looks like you have at least a 3"-4" lift.
The transfer case drop tells me you still have the slip type output shaft on your transfer case. (no SYE)
Also does not look like you have any kind of body lift.

Can't tell what kind of control arms, shocks, or the shape the bushings are in. Worn out bushings could easily make a thud like that.

TnDz TJ 04-05-2012 07:11 AM

That's not stock..... take a shot of the front and rear coils.... post them up... if those are 30-31" tires, you have at least 2-3" of lift maybe 4. I cannot see a bodylift, so that's ruled out.

With the amount of clearance, and not knowing the tire size, thats just a guess....

CONGRATS!!! Nice lookin Sport!

EDIT: Nice catch TJDAVE on the drop kit... missed that....

BUSHKILLJEEP 04-05-2012 07:58 PM

2 Attachment(s)
This is what i could do today,Any help would be grate...Thanks !!!!!

s14sh3r 04-05-2012 08:47 PM

Comparing your tires to your rims, I come up with approximately 28 inches in diameter. Those are stock or close to stock tires.

BUSHKILLJEEP 04-05-2012 09:06 PM


bigeventof85 04-05-2012 09:09 PM

Man... you guys are awesome!!! A fella posts a question in the morning and by night he knows so much more about his rig. Reading this I learned a thing or two.

Thanks Guys! Y'all are the best

s14sh3r 04-05-2012 09:09 PM


Originally Posted by BUSHKILLJEEP (Post 2224844)

The tire size was to help with determining the approximate lift. I'd guess 3 inch lift springs. I opened the side shot in Photoshop and played around with the levels and it doesn't look like it has spring spacers. The control arms look stock.

BUSHKILLJEEP 04-05-2012 09:11 PM

Thank more much bigger could i go with the tires with the lift that is on there now?

s14sh3r 04-05-2012 09:17 PM

You should be able to run 31's with plenty of room. It would be hard to say with anything bigger without knowing exactly how much lift it has.

If you have a tape measure handy, you can measure the springs and that would tell us more about how much lift it has. Stock springs are 12 inches installed height for the front, 8 inches for the rear.

Measure from the spring pad where the bottom of the spring sits, to the very top of the spring. If possible, get a picture of the top of the spring and we can tell for sure if it has spring spacers on it.

All times are GMT -5. The time now is 05:24 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.