Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Aftermarket Cup Holders ... That You Installed (http://www.wranglerforum.com/f218/aftermarket-cup-holders-that-you-installed-153173.html)

The Toolman 04-12-2012 07:12 PM

Aftermarket Cup Holders ... That You Installed
 
I need the room where the cup holders are now (in front of the Tuffy console/ behind the standard shifter) for another mod I am going to do. Anyone put cup holders in any abnormal places & have it work well?

kboles89 04-12-2012 07:25 PM

I have some from quadratec that mount on the windshield bracket to the left and right of the dash.

busemans 04-12-2012 09:23 PM

the ones that velcro to the roll cage suck. so do the ones that are in the top of the speaker pods next to the rear passenger's legs.

the best one i have ever found is between the girl's legs who is riding in the passenger seat.

Irongrave 04-12-2012 09:25 PM

you can drink something and drive your YJ at the same time. lucky. I just have my stuff in the cooler ratchet strapped to the floor

olbaid_83 04-12-2012 09:48 PM

i have speaker boxes between the roll cage and rear tire wells that have cup holders in them

busemans 04-12-2012 09:49 PM

those are the ones i have. they are terrible

gratefuljed 04-12-2012 09:54 PM

Velcro, or screw the fold up flat ones to your door - ifn you have hard doors..

aelwero 04-12-2012 09:57 PM

if'n you have doors at all... ;)

Pukeolicious 04-13-2012 02:44 AM

I would imagine the dash speaker location would be a perfect location. I don't use those speakers anyway.

Rockintheislander 04-13-2012 08:43 AM

I am working on a plan to fab some into the lid of my console. I'll let you know how it turns out.

The Toolman 04-13-2012 08:51 AM

Thanks for the input so far everyone, some very good ideas indeed :thumb:

Quote:

Originally Posted by Rockintheislander (Post 2253635)
I am working on a plan to fab some into the lid of my console. I'll let you know how it turns out.

Is it a Tuffy console? Or any aftermarket console by chance?

Rockintheislander 04-13-2012 08:59 AM

As far as I know it's still got the factory console in it. I can't shift into reverse with anything in the forward holder.

notdeankane 04-13-2012 09:48 AM

Quote:

Originally Posted by Rockintheislander (Post 2253635)
I am working on a plan to fab some into the lid of my console. I'll let you know how it turns out.

This may be a good place for boat style recessed holders, but you would lose space in the box.

TH Marine Stainless Steel Recessed Cup Holder with Drain from Wholesale Marine

You can attach vinyl tubing to the drains and route it out of the box to the floor so stuff in the box doesn't get wet.


All times are GMT -5. The time now is 10:06 PM.