Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   A/C Indicator light does not work (http://www.wranglerforum.com/f274/a-c-indicator-light-does-not-work-154526.html)

Peacekeeper820 04-18-2012 09:38 PM

A/C Indicator light does not work
 
I have a 2010 JK. The A/C works great but the light on the A/C button does not work . I have tried replacing the switch panel , but problem still exists!

Roadhawg 04-19-2012 10:40 AM

Take the top off and don't use the a/c :)

Peacekeeper820 04-21-2012 07:08 AM

WOW! I would have never thought of taking the top off. How do you do that?
You are obliviously an engineer and highly intelligent, can you send me details instructions and possibly pics?

Thanks so much for solving my issue!

GREEN-MACHINE 04-21-2012 07:16 AM

have you checked the ac system it self,, if you have low refrigerant , it may cause this issue,, i remember my chevy p\u did this,, ac worked but dash light would not go on,,, charged system and all was good. light on and ac worked even better.

Peacekeeper820 04-22-2012 06:48 AM

I will check, thanks.

Ramiromdl 06-02-2012 08:23 PM

Fuse
 
Quote:

Originally Posted by Peacekeeper820 (Post 2276389)
I have a 2010 JK. The A/C works great but the light on the A/C button does not work . I have tried replacing the switch panel , but problem still exists!

//
I have the same problem and i get it because i change the ignition fuse. Did you fixed now?

Ramiromdl 06-04-2012 05:52 PM

i fix it is the red 10 amp fuse m34 /http://www.jeepforum.com/forum/f96/jeep-jk-fuse-box-map-layout-diagram-959526/


All times are GMT -5. The time now is 11:41 PM.