Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Transfer. skid bolt question (http://www.wranglerforum.com/f282/transfer-skid-bolt-question-157477.html)

Bsc 05-01-2012 11:43 PM

Transfer. skid bolt question
 
I was going to remove the transfer drop and while removing the skid I found the bolts have centering heads on them how important is this I have replacement bolts but they are just standard grade 8 bolts without the centering flang, Can I just place a washer on the bolt and call it good.

darkproximity 05-01-2012 11:51 PM

Get conical washers that fit it, and use a lock washer on top of that as well

Bsc 05-01-2012 11:52 PM

Thanks for the help

darkproximity 05-01-2012 11:56 PM

No problem, if you can't find any to fit it i'm sure you could get away with a nice thick washer, and lock washer, you can tighten it up until the washer starts to bend.. As long as the bolts can't back out you're set :)


All times are GMT -5. The time now is 12:40 PM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.