Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Communications and Electronics (http://www.wranglerforum.com/f40/)
-   -   Hids (http://www.wranglerforum.com/f40/hids-157919.html)

Wdbhalsted 05-03-2012 10:55 PM

Hids
 
Just ordered a hid kit off of eBay for my 05 wrangler x. They are H3 10000K bulbs and it's a conversion kit. I was wondering if there is a lens that will fit the H3 bulb for my jeep? Also how do I get the wires to connect seeing as I have a sealed beam?

Wdbhalsted 05-03-2012 11:06 PM

Ive also been told they only make h4s for jeeps. Is that true? Are h4s even hids

Sloan409 05-04-2012 01:07 PM

You have to buy new housings for H4 bulbs for the headlights. H3 bulbs fit into auxillary lights, they are not the standard size for headlights.

Peepers 05-04-2012 01:11 PM

Quote:

Originally Posted by Sloan409 (Post 2334839)
You have to buy new housings for H4 bulbs for the headlights. H3 bulbs fit into auxillary lights, they are not the standard size for headlights.

x2^^^ H4 is the typical replacement housing.

And why oh why did you go 10k? those things are going to be blue as hell... Good luck seeing at night...

Wdbhalsted 06-05-2012 04:34 PM

Thanks for the help guys! And I was going 10 k because I was also going to run some 6k spots on the bumper.

sparky 06-05-2012 04:51 PM

H3's are not headlight bulbs, they are only single filiment. H4's have high and low beam.


All times are GMT -5. The time now is 01:56 PM.