Trying to finish up my 350 swap and the last part I'm having problems with is getting a high pressure power steering line made up. I have the old ones of my 89 jeep but it doesn't match up to my 350 1st gen pump. A 3/8 ffitting fits the pump, but summit racing says that isn't possible. I have a 3/8 fitting in there now with a hose going back to the return just to keep the fluid in right now. Does anyone know what the actual size thread typ of fitting that I need for the pump. No one in my town makes power steering lines, but a shop did tell me they would make me the lines if I had the proper fittings.
05-04-2012 09:57 AM
It should be a saginaw p/s pump....if so, just take the fitting out of the back of the pump (dont loose the spring) and take it with your stock hose down to the parts house