Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   trans ratios and control arm questions (http://www.wranglerforum.com/f210/trans-ratios-and-control-arm-questions-1580.html)

ghogklr 04-16-2006 07:34 AM

trans ratios and control arm questions
 
first, does anyone know the gear ratios for the 6 speed? tried looking on the honsel site and found nothing relating to Jeeps.

Second, when putting on rubicon express standard fixed lowers, does the offset end go on the axle or frame?

thanks

jeepsrus 04-16-2006 08:54 AM

By off set, do you mean the end that is slightly bent upward?

jeepsrus 04-16-2006 08:55 AM

If so, that is the end that goes towards the axle.

Why are you needing the gear ratios in your tranny?

jeepsrus 04-16-2006 09:15 AM

This will give you all the information you should need.

http://www.vibratesoftware.com/html_...nsmissions.htm

ghogklr 04-16-2006 03:40 PM

Thanks for the link. I'll try to find a model ID tag on it while I'm installing my SYE tomorrow. Just one of those things I get off on knowing I guess. My wife says I'm the king of useless information.

thanks


All times are GMT -5. The time now is 08:59 AM.