Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   CJ General Discussion Forum (http://www.wranglerforum.com/f298/)
-   -   MotorCraft question (http://www.wranglerforum.com/f298/motorcraft-question-159143.html)

AC3tj 05-09-2012 01:31 PM

MotorCraft question
 
i recently rebuilt and installed a motorcraft 2150 carb on my 86 cj7 with a 258. ofcourse it runs to rich when your on the throttle. the rpm jump all over and has no power to do any kind of hill. what size jets are you guys running on your mc2100s? and do you think this would fix the problem?

Cj7otr 05-09-2012 10:50 PM

Are your vacuum lines all good?

AC3tj 05-10-2012 11:25 AM

vacuum lines should all be in the proper places. i dont think that would make it run so rich when im on the throttle any way.

Cj7otr 05-10-2012 12:41 PM

Vacuum ports or lines open would make it run incorrectly and so then when you set up the idle it would be off from the start.

Is the float set up correctly? Both wet and dry?

AC3tj 05-13-2012 10:13 PM

im sorry im a novice with carbs so this might sound dumb. theres a wet and dry setting for carb?

Cj7otr 05-15-2012 03:58 PM

These are good articles:

http://street2mud.com/webfiles/MC-21...%20a%20258.pdf

http://www.ifsja.org/tech/fuel/2150.html


All times are GMT -5. The time now is 06:57 PM.