Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   New Jersey Jeep Forum (http://www.wranglerforum.com/f93/)
-   -   Question for those that have tires sticking out past fenders... (http://www.wranglerforum.com/f93/question-for-those-that-have-tires-sticking-out-past-fenders-159381.html)

NFRs2000NYC 05-10-2012 05:35 PM

Question for those that have tires sticking out past fenders...
 
I am looking at purchasing a set of Level 8 Trackers with 33" 12.50 Duratracs on them, but have one concern. Have those of you with tires sticking out past the fenders been hassled by the fuzz? Is it something they crack down on in Jersey, or is it something they don't care about like HIDs? Thanks for the help!

Rick8240 05-10-2012 07:50 PM

There are a ton of us, with our wheels sticking out of our fenders,here in Jersey no problems whats so ever

NFRs2000NYC 05-10-2012 08:16 PM

Thank you brother.

Rayko 05-11-2012 09:56 AM

I'm running 33x12.5"s never had a problem either.

srad600 05-11-2012 05:25 PM

A jeep got pulled over in my works parking lot for it 2 weeks ago. The cop was a customer and I asked him, he didn't write her...said he didn't care. He was just hoping to get her for something like unregistered since it looked like a trail only rig.

Tal419 05-12-2012 03:29 PM

I was out on a trail ride with a group a few months ago. We all took a break in a parking lot around Wharton State Park and the rangers started doing drive-by's to see who was legal and who wasn't. One guy got a ticket for it.

It all depends on the situation, time of the month, and where you are. Better off spending the extra $ on a cheap pair of flairs. They will be cheaper then the ticket you may get. It's also an invitation for a cop to give you a hard time and go over your whole jeep looking for violations.

It's a crap shoot. Good luck.

CLIMEIT 05-15-2012 01:35 PM

Pop em out!!!! Alll day ...

jcf 05-15-2012 01:41 PM

Never had any problem with "the fuzz" but here they tend to turn a blind eye unless the driver is doing something else wrong

Lineman827 05-24-2012 04:08 PM

tend to agree w/those that say is a crap shoot. i have 35x12.5 and at this point no back fenders.. and no prob yet...knock wood.

its funny, i heard a ranger@ the atsion station givin some crap last mem. day wknd. i asked whose yellow jeep was parked in the lot, its nice... he said it was his. wide tires and all.. what a tool!!!

Tattoo Tony 05-27-2012 07:43 AM

I was wondering about this as well, I just took the stock flares off my YJ and I actually plan on running that way for a bit.

srad600 05-27-2012 08:23 AM

Well the guy above you actually got "kicked out" of the woods yesterday because he has flats on the front and none on the rear.

Lineman827 05-27-2012 08:30 AM

srad, i think i just ran into a d-bag assertin his authrity on a holiday wknd. ive been seen by rangers on the basto side and got just a friendly return wave. but, im prob gonna get a set of flares for the rear, leave the flats up front.

so srad,.ill split a set of 4 w/ya lmao u can do the same thing

srad600 05-27-2012 08:34 AM

Yeah I agree I have seen rangers and had them wave back. My wife was shocked when I told her too.


Id do that if you actually found a set of 4 just rears. lol.

I talked to bushwacker before and they will sell just the rear pocket styles we would need they just dont have the part number listed.

Lineman827 05-27-2012 08:36 AM

nice, lol... my wife just laughed, even took a pic lol.

Lineman827 05-27-2012 08:39 AM

1 Attachment(s)
Attachment 126581

Tattoo Tony 05-27-2012 10:03 PM

My issue is all the ones I have seen are so freakin expensive. Does anyone make a reasonably priced set?

bmanrkg3 05-27-2012 11:10 PM

Oversized or flat? I have the rugged ridge oversized fender flares, and they didn't break my bank...

Lineman827 05-28-2012 06:03 AM

the flat ones just do do it 4 me, but the more i look around the more the price makes them attractive....lol

Lineman827 05-28-2012 06:03 AM

****dont do (fat finger)

Tattoo Tony 06-02-2012 04:46 AM

My yj is pretty much stock, I would imagine the flat ones would work fine. Do you guys have a Manufacturer name?


All times are GMT -5. The time now is 06:08 AM.