I need help: YJ bogging/idle-ing/rpm issues
Let me start by saying I am new to the jeep world, and may not know the correct terminology, but I have no problem getting my hands dirty and fixing what needs to be done.
I own a 1990 YJ Wrangler, 2.5l. I am pretty sure my carb is a TBI. It seems to have all original stock mechanical parts, and ran like a champ. My gas tank had a leak so I needed to fix it. My buddy owned a larger custom gas tank and he claimed specified for jeeps. While changing the gas tanks, we realized that some of the hoses coming from my jeep didn't match that ones on the fuel tank, so we bought larger bulk hoses and connected them with adapters. We re-installed the new tank, not knowing that inside the new tank their was no fuel pump.
We proceeded to turn the key over for 30-35 mins while putting gas into the carb to try and create pressure (as my buddy insisted, along with jumper cables to keep the battery from draining). After a while I was frustrated and said no fuel was running through the lines. I was right because their was no fuel pump inside the new tank.
After taking everything apart again by myself this time is when I realized that their was no pump. So I went to orielly's and the gal their said I needed a fuel pump that had 4-7 psi, and handed one to me for 49 bucks. I installed the new pump as far down the gas line (i made sure this was the right line) as I could and wired it up to my ignition wire. It took 15 mins of turning the key until finally I heard a burp. But it was to late outside in my working environment to continue.
The next morning I turned the key over and it started up, but not the way it should. When it started the rpm's flew to 3k, then way down to .5k, and if I feathered the gas, their is a 2-4 second delay from my foot touching the peddle and a response. I tried to take it down the road, and it keep bogging bad. It died 3 times in 40 yards and would jerk while going down the road as if your slamming down on the brakes. The rpms while fly up and down wildly and dies randomly. I can sometimes maintain a steady 2-2500k rpm in neutral, but that's if i am lucky.
I have reached out for help from all my friends and no one knows. So, I decided to go online to seek some help. This is the first place I ran into, so I signed up and hopefully someone will be able to help me out!!!
Thanks for your time in reading this,
Did you change the fuel filter? It might have gotten clogged.
The fuel pump you bought doesn't have enough pressure for the fuel injection system in your Jeep. The tbi systems require 14-15 psi at the injector. You'll probably want to get a pump that puts put a little more than that so that the fuel pressure regulator in the throttle body can do it's job.
|All times are GMT -5. The time now is 05:45 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.