How do I get the air out of the slave cylinder on my 87 YJ. I had a new clutch put in and then after driving it a little while it quit going into the gears. I had a new slave cylinder put in and there are air bubbles and it still won't go into gear. Not very mechanically inclined but just saying what my buddy said was wrong. Any info would be great. Thx.
05-12-2012 11:09 PM
If there are still bubbles and you have bled it rite then it could have a leak in the hose and sucking in air. or fittings
05-13-2012 11:08 AM
Put a new one on and it worked. I finally can take the jeep out. Thanks for the info.