Whats up guys,
I just picked up some KC daylighters that I want to mount on my MBRP brush guard (see avatar/pro pic?), and I wanted to know if I needed anything else besides the guard (w/ mounting tabs included) to hang the lights from the tabs on the top inside of the guard. Have any of y'all hung lights from a brush guard before, and if so, what did you need in order to do so?
Thank you guys in advance for your help. This is the first mod I have done that involves hooking anything up, so I am still getting to know my Jeep in that sense.
05-14-2012 10:55 PM
The KC lights will include everything you need, including some very easy to follow wiring instructions. Pop off the side poanel of your dash and use a coat hanger to run the wire through the nickel sized foam filled hole.
05-14-2012 11:04 PM
X2 I think........am assuming you have the complete kit to install the daylighters? If that is what you have than it is "Cake" just plan on taking your time...and nothing personal but I would double the time they say it takes. Did Daylighters and slim lights on the TJ and it is worthtaking your time so you don't have to redo it.
05-14-2012 11:38 PM
'Preciate it guys. The kit i bought looks pretty complete, so I should be OK. Should be a fun weekend diving into the electrical system of my Jeep. I will let y'all know how it turns out. thanks for the help!