Jeep Wrangler Forum

Jeep Wrangler Forum (
-   YJ Tech Forum (
-   -   problems with my 4x4 yj (

ditchdoc0331 05-15-2012 03:46 PM

problems with my 4x4 yj
hey guys i have a 95 yj i put a 4in rubicon express lift kit on it came with all parts need i then had to get my rear drive shaft extended 2 inches heres the problem, i can shift into 4 low but cannot shift into 4 high or 2 high, any ideas why this is happening 4 low works great just need the other 2 also

woodsy 05-15-2012 09:54 PM

did you have to unhook your transfer case shift linkage to do the install if so i would check to see if you have it hooked back up properly.

MMYJ1993 05-16-2012 11:14 AM

CHECK THE ADJUSMENT here is the picture

MMYJ1993 05-16-2012 11:17 AM


Originally Posted by MMYJ1993 (Post 2374155)

CHECK THE ADJUSMENT here is the picture

looking at the lever # 5 for it to be in 2wd it needs to be all the way to the right ( towards the rear on the jeep there is a thread on how to adjust it correctly .

ditchdoc0331 05-16-2012 04:44 PM

Thanks allot guys i'm gonna check on that

All times are GMT -5. The time now is 12:54 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.