Jeep Wrangler Forum

Jeep Wrangler Forum (
-   Kansas Jeep Forum (
-   -   jeep wont fire (

kevinmac 05-25-2012 12:39 PM

jeep wont fire
I drove my 1990 jeep wrangler into my garage and two days later I tried to start it and no fire. I changed the coil and coil pickup and put a new distributor cap and rotor. Still no fire. I have power to the coil and out of it. All gauges work and lights so I dont know what to check now. Anyone have any ideas? Is there a fuse somewhere that would cause this? It has the straight six auto.

boman40 06-14-2012 10:39 PM

Check fuel pressure. If fuel pressure is ok, replace the crank position sensor.

All times are GMT -5. The time now is 09:44 AM.