Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ General Discussion Forum (http://www.wranglerforum.com/f290/)
-   -   spare tire plate?? creative ideas for those without spare tires on the back. (http://www.wranglerforum.com/f290/spare-tire-plate-creative-ideas-for-those-without-spare-tires-on-the-back-162742.html)

screech1 05-26-2012 08:57 PM

spare tire plate?? creative ideas for those without spare tires on the back.
 
3 Attachment(s)
Wondering if anyone has seen any thing like custom cut plates to go there the spare tire carier would go? I took mine off and was thinking of a plate maybe with a Jeep cutout that would incorporate my license plate on it too...

Attachment 126453



Attachment 126454



Attachment 126455

WellsR 05-26-2012 09:02 PM

Im sure two of the holes line up with a plates holes. But not 100%, if not fill the old holes, drill and tap new ones and your good to go

And I love the color of your yj

screech1 05-26-2012 10:31 PM

i was thinking more along the lines of a plate that would look good on there and my plate could be in the middle. just to kinda tie it all together so its not just a plate sitting in the gate...

thanks!! its growing on me :thumb:

WellsR 05-26-2012 10:36 PM

Quote:

Originally Posted by screech1 (Post 2407818)
i was thinking more along the lines of a plate that would look good on there and my plate could be in the middle. just to kinda tie it all together so its not just a plate sitting in the gate...

thanks!! its growing on me :thumb:

More plates = more holes :thumb:

But whats the color called? Mines about to get a new paint job next paycheck :punk:

wmwhitey 05-26-2012 10:37 PM

Mine I have my third brake light behind it now.

2xs 05-26-2012 10:56 PM

I was thinking a custom Fuel can mount using those holes that no longer hold the spare anymore...

say 2 Jerry cans with a sticker that says "Go Ahead, Hit Me"....

YJ325i 05-27-2012 09:14 AM

Just curious, why you want to remove the spare from there? something different

screech1 05-27-2012 09:26 AM

I just like how clean it looks. I was thinking along the lines of having a plate that's laser cut out Jeep on top and wrangler underneath and my plate would mount in the middle. Or maybe say something more custom.

Maybe another idea I could put my license plate on it and make mounts for a mini shovel and ax so they would sit sideways on the gate.


Options options. Loving the input guys... gets me thinking.

denisbaldwin 05-27-2012 10:23 AM

I'm going to use mine to house two jerry cans. Shouldn't be too hard to build a mount for that.

screech1 05-28-2012 06:09 PM

now im thinking about on the plate doing an ax holder and small shovel holder horizontal and having the plate between it...

BAP 05-28-2012 06:24 PM

mine carries my feed bucket down to the horses


All times are GMT -5. The time now is 09:53 AM.