Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Raptor lining questions (http://www.wranglerforum.com/f282/raptor-lining-questions-164329.html)

Colin 06-03-2012 05:20 PM

Raptor lining questions
 
2 Attachment(s)
I have started prepping my jeep now for raptor liner and got the bolts out for the passenger seats. But once I removed the seats and the contraption below it I have this piece of metal which I'm unsure of if I should remove? Or if you can't do I just spray as best as I can in the cracks?


Attachment 128623



Also do I need to remove bolts such as these? I know I need I tape off the bolts in use for seats etc, but the bolts in the picture don't go to anything but below the jeep.


Attachment 128624

Any help would be appreciated!

Futuresweets10 06-03-2012 05:36 PM

DONT remove anything with rivets like in the first pic. If you want to ever be able to get the bolt out in the second pic Id take it out. You can go over it, cut the liner off later and then patch the liner if you dont want to take it out now. Its all a preference thing.... Do you want it to be easy to remove later and not covered in liner or covered in liner and not easy to remove later. If you do spray over it, id spray it very light.

Colin 06-04-2012 08:44 AM

Alright will do thank you for the help!

McDaniel 06-04-2012 11:34 AM

The first pictures shows the mounting plate for the jack & jack handle. The next picture i think is one of the bolts for a heat sheild under the tub and above the exhaust, I would leave those and raptor over them.

McDaniel 06-04-2012 11:41 AM

when i get home tonight i will try to post up some pictures. Foam ear plugs work great for masking all the bolt holes.

RubiCobra 06-04-2012 12:00 PM

Quote:

Originally Posted by McDaniel (Post 2435656)
when i get home tonight i will try to post up some pictures. Foam ear plugs work great for masking all the bolt holes.

x2

I used wadded up paper towels at first, but it was really hard to remove in one piece and left some chunks in the liner.

Colin 06-04-2012 12:36 PM

1 Attachment(s)
Also found this under drivers seat. Maybe someone autographed their initials from the factory? Lol

Attachment 128870

McDaniel 06-05-2012 07:49 AM

promissed pictures
 
Here I hope this help you






http://i107.photobucket.com/albums/m.../Jeepspray.jpghttp://i107.photobucket.com/albums/m...1/Jeepprep.jpg

GoldenSahara00 06-05-2012 07:54 AM

I left the bolts in that you pictured. They come right out. You can use the stuff mentioned, or if you have them handy, golf tees work great too. As far as under the seat just spray from different angled. Then use your little bit left at the end on a brush to touch up spots you may have missed.

Colin 06-06-2012 04:15 PM

1 Attachment(s)
Took me 3 bottles and going to save the last for touch ups but here is a after picture of today and hopefully install everything back in tomorrow.


Attachment 129534


All times are GMT -5. The time now is 06:59 AM.