Jeep Wrangler Forum

Jeep Wrangler Forum (
-   CJ General Discussion Forum (
-   -   SYE and CJ's ? (

CJ-John 06-04-2012 07:27 AM

SYE and CJ's ?
Here's a newb question. Are the CJ's already set up without a slip yoke on the transfer case? How much lift on a CJ7 before you start having vibration issues? I don't plan (read that as can't afford) to go more than 2" to 3" lift. will it require drive shaft mods? Steering linkage mods? I hate extended shackles so would a temporary set of add a leafs be to harsh riding? (I only have 31" tires) Thanks

4Jeepn 06-04-2012 08:08 AM

No sye on the CJ... 3" or under you should be fine with the shafts.. check u-joints of course fo playr, Steering, should be okay. maybe a drop pitman.. been about 10 years since i lifted my last CJ so not sure on the pitman.

03_TJ 06-07-2012 08:46 AM

I think a Cherokee Pitman will give you the drop. I'm going to try it on mine {I have a 90 cherokee parts jeep} ;)

Dempsey 06-07-2012 10:01 AM

Dana 20 and Dana 300's do come factory with fixed no SYE is required.

They also come with non-cv driveshafts (2 u-joints) but when you upgrade on a YJ or TJ you go to a CV/double cardon d-shaft (3 u-joints). But you can change the yoke out to accept a cv style driveshaft if need be on the cj. I have done that on mine.

RubiconRich 06-15-2012 07:52 PM

real Jeeps don't have SYE's :rofl:

sean112280 06-15-2012 08:26 PM


All times are GMT -5. The time now is 05:36 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.