Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Breather hoses (http://www.wranglerforum.com/f274/breather-hoses-165399.html)

Jervboy 06-08-2012 10:29 AM

Breather hoses
 
Question, my breather hoses, the two differentails(axels) and the transfer cases are in good shape and are mounted and run pretty high. I do not have much lift, 1.5" currently, and I can't imagine there is any issue with much flex at this point. I was not going to tinker with them because at this point there doesn't seem to be a need. Any opinions? I realize if I put on more lift, which I plan to, I may have to check them again to see if they are stretching when at full flex.

kjeeper10 06-08-2012 11:16 AM

I'm almost 3" in the rear and pushing it.

You should be OK

pluke the 2 06-08-2012 01:32 PM

i had to extend mine. running a 4" lift.

pluke the 2 06-08-2012 01:33 PM

http://i1116.photobucket.com/albums/...2/CIMG5023.jpg

pluke the 2 06-08-2012 01:34 PM

http://i1116.photobucket.com/albums/...2/CIMG5022.jpg

joe002 06-08-2012 03:25 PM

Quote:

Originally Posted by Jervboy (Post 2451585)
...I was not going to tinker with them because at this point there doesn't seem to be a need. Any opinions?...

Just put a clamp on both of them and you should be OK as long as you don't submerge your Jeep too far.


All times are GMT -5. The time now is 09:13 AM.