Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Programming Seat Belt Alarm (http://www.wranglerforum.com/f274/programming-seat-belt-alarm-166871.html)

Ran-Bo 06-14-2012 03:31 PM

Programming Seat Belt Alarm
 
Hey all...does anyone know how to program the 2010 Wrangler to eliminate the annoying seatbelt dinger. My wife's 2008 Liberty was easy, it referenced it right in the manual...can't find anything for the Wrangler.

Oglethorpe 06-14-2012 03:42 PM

Pretty sure it is in the manual (at least it was for my 2011)...

But Google does the trick, too

How do you disable seat belt alarm 2010 jeep wrangler

CA3 06-14-2012 05:22 PM

Insert key into ignition, buckle seatbelt and turn key to on but do not start engine. Within 60 seconds, Unbuckle and buckle seatbelt 3 times, cycling seatbelt indicater on and off. Red LED in lower right of guage cluster will flash three times to indicate reprogram.

Rooster76 06-14-2012 10:02 PM

Quote:

Originally Posted by Oglethorpe (Post 2473414)
Pretty sure it is in the manual (at least it was for my 2011)...

But Google does the trick, too

How do you disable seat belt alarm 2010 jeep wrangler

It still works on the 2012's but they took it out of the manual

Quote:

Originally Posted by CA3 (Post 2473757)
Insert key into ignition, buckle seatbelt and turn key to on but do not start engine. Within 60 seconds, Unbuckle and buckle seatbelt 3 times, cycling seatbelt indicater on and off. Red LED in lower right of guage cluster will flash three times to indicate reprogram.

This should work. While your at it there are some other things you could do like get all the doors to open on the first unlock on the key fob. -->http://www.wranglerforum.com/f33/man...le-155357.html

Ran-Bo 06-15-2012 08:27 AM

Thanks guys...worked like a charm.

BlackOpsJeep 06-16-2012 01:06 AM

hmm...tried several times to no avail on my 12 JKU. I'm pretty tech savvy and I'm doing it exactly as instructed. :banghead:

Rooster76 06-16-2012 01:43 AM

MISSING->and wait for the Seat Belt Reminder Light to turn off.
 
Quote:

Originally Posted by CA3 (Post 2473757)
Insert key into ignition, buckle seatbelt and turn key to on but do not start engine. Within 60 seconds, Unbuckle and buckle seatbelt 3 times, cycling seatbelt indicater on and off. Red LED in lower right of guage cluster will flash three times to indicate reprogram.

Remove Seat Belt Reminder Chime -Enhanced Seat Belt Use Reminder System
(BeltAlert_)
NOTE: The following steps must occur within the first
60 seconds of the ignition switch being turned to the
ON/RUN or START position. Chrysler Group LLC does
not recommend deactivating BeltAlert.
1. Turn the ignition switch to the OFF position, and
buckle the driverís seat belt.
2. Turn the ignition switch to the ON/RUN position (do
not start the engine), and wait for the Seat Belt Reminder
Light to turn off.

3. Within 60 seconds of starting the vehicle, unbuckle
and then re-buckle the driverís seat belt at least three
times within 10 seconds, ending with the seat belt fastened.

Quote:

Originally Posted by BlackOpsJeep (Post 2478837)
hmm...tried several times to no avail on my 12 JKU. I'm pretty tech savvy and I'm doing it exactly as instructed. :banghead:

It worked for me on my 2012.

The instructions above seem to be missing--> and wait for the Seat Belt Reminder Light to turn off.

Good Luck, at least you only need to do it once

CA3 06-17-2012 06:40 AM

Yeah, my bad. You have to have your seatbelt buckled when you turn on the ignition and you have to wait for it to cycle through the warning lights before you start the unbuckle/buckle process.

Prelud3 06-30-2012 12:03 AM

Just to add another update on how to do this. follow above insturctions. at the end, when you have the seat belt buckled, SHUT THE VEHICLE OFF.

I'm an idiot and spent an hour doing the above instructions then immediately firing up the vehicle to no avail. What finally fixed it? Above instructions and at the end turn the key back off! I felt like an idiot lol

Thank you so much guys!

I know there have been a lot of flame wars about this topic (i drive with it on).... but when I'm out feeding cattle on the farm using my jeep... the seat belt is a hassle, and the beeping about drove me dang insane!

Thanks!

mo1416 06-30-2012 12:11 AM

Good info.

ChipW 06-30-2013 12:22 AM

works on a 2013 model also, what a relief to get rid of the dinger on the trail. ;)

ironman2443 07-01-2013 09:47 PM

Thanks for the info!!

Tusinator 04-04-2014 02:25 PM

Works on a 2014 jk as well

Czee76 04-05-2014 08:57 AM

Finally! Thanks for the post!


All times are GMT -5. The time now is 05:33 AM.