I am looking to buy a 94 complete dash for $150, but i'm not sure if it will fit in my 87. It has everything cluster w/o clock (mine has clock), heat control, and all plastic. Will this work? If it does I'm getting it for a great price.
So my questions is what will work v.s. what will not.
03-18-2008 07:57 PM
will fit, right off hand your speedo is driven by a cable, but you can remove speedo from new one, and keep your cable driven speedo. i think heater controls will be the same. do you have a dash already? if you do, what ever doesn't plug right in, you should be able to swap.
03-18-2008 08:42 PM
03-19-2008 07:12 AM
Hell, I put an 05 in a 90 model...ok..pieces of it anyway!!
03-19-2008 12:11 PM
I put a 95 dash in my 91. I didn't have the engine wiring harness so I made the 95 dash wiring match up to the 91 computer etc. Took a lot of tracing wires, switching around wires in harnesses and a little bit of splicing. Luckily my 91 had a speed sensor as well as the cable driven speedometer, so I just tapped directly into the speed sensor wiring and sent one wire right up to the back of the cluster. All in all took about 5 tries to get it perfect with everything working as it should.