Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ General Discussion Forum (http://www.wranglerforum.com/f290/)
-   -   front driveshaft lengths? (http://www.wranglerforum.com/f290/front-driveshaft-lengths-172.html)

lavacrawler 05-31-2005 11:34 PM

front driveshaft lengths?
 
After adding another 2" to the front w/ a SRS system, my front driveshaft was a little shoter and after a year of wheelin it like that I finially pulled the front out and destroyed the shaft.
I'm going to go to the wrecking yard tomorrow but was wondering if there was any difference in length between the 4 and 6 cylinders and auto or manual?
I have a 4 cylinder.
Thanks
Cory

Lee 06-01-2005 10:56 AM

auto tranny driveshaft is about 4" longer than a manual tranny driveshaft

LeadFoot 06-16-2005 08:13 PM

With a SRS you need a long travel driveshaft. A longer shaft won't fix it, your just going to compress the shaft past the compressed length of it and break the front half of your 231.


All times are GMT -5. The time now is 04:09 PM.