Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Virginia Jeep Forum (http://www.wranglerforum.com/f74/)
-   -   Design and fabrication help needed (http://www.wranglerforum.com/f74/design-and-fabrication-help-needed-173295.html)

silver rubi 07-13-2012 01:10 AM

Design and fabrication help needed
 
- Mod- Not sure if this is the correct thread to post this in. Please move it if you need to. Thanks. -

:wavey: :wavey: :wavey: :wavey: :wavey: :wavey: :wavey: :wavey: :wavey: :wavey:

I am looking to design and fabricate a custom locking bracket for my 2006 Rubicon to mount a HAM, CB, Scanner, and EMS Radio, as well as switches. I am also looking to design and fabricate a locking box for the "trunk" area to mount the actual radios and 2 gun safes.

I am new to this and have no idea how to fabricate. Any suggestions are welcome!

Is anyone in the Richmond, Va area able to help me?

silver rubi 07-14-2012 01:19 AM

help... anyone??

silver rubi 07-23-2012 12:07 AM

Anyone???

batty505 08-27-2012 02:16 PM

Hey rubi
Not sure if you found some to fab your bracket/shelf thing

My suggestion is to reach out to a club to see who their members make stuff

You may want to check out Quadratech and 4wd jeep essentials. Both give out free catalogs

Hope this helps
Mike

silver rubi 08-28-2012 12:31 AM

Quote:

Originally Posted by batty505 (Post 2730257)
Hey rubi
Not sure if you found some to fab your bracket/shelf thing
My suggestion is to reach out to a club to see who their members make stuff
You may want to check out Quadratech and 4wd jeep essentials. Both give out free catalogs
Hope this helps
Mike

Hey! Thanks for responding. I haven't found anyone to help. I've looked at Quadratec and 4wd and they don't have anything that will work for what i'm trying to do. I'll check out a few clubs. Thanks for the suggestion.:wavey:

batty505 08-30-2012 07:19 AM

Hey rubi

Gotcha. You could check on CL for custom welding services, I've seen folks barter their welding skills for stuff.
Personally I plan on taking a few mig welding classes at the local comm college to do something similar
Lolz

Hope this helps
Mike

silver rubi 08-30-2012 01:48 PM

Awesome! I'll check on that. I appreciate it. Good luck with the class! :)
Quote:

Originally Posted by batty505 (Post 2740283)
Hey rubi

Gotcha. You could check on CL for custom welding services, I've seen folks barter their welding skills for stuff.
Personally I plan on taking a few mig welding classes at the local comm college to do something similar
Lolz

Hope this helps
Mike


kfdjason7620 08-30-2012 02:00 PM

You got any ideas or plans on paper?

silver rubi 08-30-2012 02:28 PM

They're in my head right now, but I can put them on paper.
:popcorn:
Quote:

Originally Posted by kfdjason7620 (Post 2741614)
You got any ideas or plans on paper?


kfdjason7620 08-30-2012 02:40 PM

If you can imagine it, I can build it out of metal!

batty505 09-06-2012 06:23 PM

I may look you up to concerning some welding.

Mike

kfdjason7620 09-06-2012 07:12 PM

Sure!

silver rubi 09-10-2012 06:13 PM

If I can send you what I'm looking for could you give me an idea of what you would charge to do it?

Quote:

Originally Posted by kfdjason7620 (Post 2741745)
If you can imagine it, I can build it out of metal!


kfdjason7620 09-10-2012 06:18 PM

Sure can.


All times are GMT -5. The time now is 04:29 AM.