ok, I know a thread about this comes up about once a week, but I was consedering getting a SYE and new drive shaft in order get rid of my tc drop. My concern is that in the future if I replace my Dana 35 with a 44, will I have to buy a new drives shaft then? I would hope not since the length would be the same, right??? Thanks guys, ~ Cooper
04-05-2008 09:57 PM
No - you should be ok.
04-05-2008 10:16 PM
I think the difference is about .25" between the two shafts so no big deal.
04-05-2008 11:17 PM
As long as the yoke is the same on both you should be ok. The 35 comes with a 1310 yoke...just make sure the 44 has the same (or get one to match).
04-06-2008 09:35 AM
Extending a drive shaft or shortening one isn't all that expensive. Cost is ~100 bones locally. The tube isn't the expensive part. Unless you get .25 walled stuff. :D