Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Pictures Forum (http://www.wranglerforum.com/f115/)
-   -   Lets see the all the TJs on 35s (http://www.wranglerforum.com/f115/lets-see-the-all-the-tjs-on-35s-174268.html)

97flexy 07-17-2012 08:13 AM

Lets see the all the TJs on 35s
 
post a picture and what your running, motor, gears, lift and tire size.
I'l start...
http://img850.imageshack.us/img850/9307/gedc0063v.jpg
http://img521.imageshack.us/img521/9566/newtires.jpg
2.5L, 4.56s(for now), 2" suspension 1.25" BL 35x12.5

ok so its not sitting on them but it will be in a week after my axle bearings get pressed in.

MA Wheeler 07-17-2012 12:44 PM

You may need to drop to 4.88's if your still on the stock Dana 35's. Been there done that!

MA Wheeler 07-17-2012 12:46 PM

1 Attachment(s)
Attachment 141765

35/12.50/15's

Hoagie. 07-17-2012 12:48 PM

thats a 2.5l?!

MA Wheeler 07-17-2012 12:52 PM

Roger that!

It's all about the gearing set up.

MA Wheeler 07-17-2012 12:58 PM

Oh' and a few other options. I don't want to hijack the tread. Maybe for a different post.

97flexy 07-17-2012 02:48 PM

My axles are a Dana 44 front and a 9" rear

97flexy 07-17-2012 02:50 PM

Quote:

Originally Posted by MA Wheeler (Post 2593217)
Attachment 141765

35/12.50/15's

what size lift? are your axle stock?

TJDave 07-17-2012 03:08 PM

3" springs, 1.25" Body lift, 35's, 4.0L, 4.88's, D30/D44.

http://i273.photobucket.com/albums/j...jpeg_2-104.jpg
http://i273.photobucket.com/albums/j...ejpeg_2-90.jpg
http://i273.photobucket.com/albums/j...ejpeg_2-74.jpg
http://i273.photobucket.com/albums/j...ejpeg_2-34.jpg

97flexy 07-17-2012 03:17 PM

nice rig!:thumb:
I can'r wait to see how mine sits.

Kota7x 07-17-2012 04:12 PM

2004 LJ 4.0 with 4.25" Sus, 1" BL, 35x12.5x15 BFG ATs, S-D30 upfront, D44 Rear (Both have ARB Lockers), 4.88 Gears, 4 Speed 42RLE :banghead:
http://i1092.photobucket.com/albums/...x/d164fbd1.jpg

1998 TJ 4.0 with 4" Sus, 1" BL, 35x12.5x15 BFG ATs, S-D30 upfront, S-D44 Rear (Both have ARB Lockers), 4.88 Gears, 5 Speed Manual
http://i1092.photobucket.com/albums/...x/IMG_0925.jpg

Kate 07-17-2012 04:17 PM

06 Rubi
Auto
5.13 gears
Cepek Mud Countrys

and one Ssssssssssssssssssssseeeeeexy sum-beech!

http://i292.photobucket.com/albums/m...ver/Ajax-1.jpg

MA Wheeler 07-17-2012 07:00 PM

Quote:

Originally Posted by 97flexy

what size lift? are your axle stock?

3.5 Rubicon Superflex, 1" body , ACOS At bottom setting, stock Dana 30/35 Alloy Axles w/ 4:88's, ARB AIR Lockers,Tera-Low T-Case,

Crawl Ratio is awesome, highway speed is comfortable at 70, I get 16 mpg both city/hwy (love that!)

97flexy 07-17-2012 09:27 PM

Quote:

Originally Posted by MA Wheeler (Post 2594757)
3.5 Rubicon Superflex, 1" body , ACOS At bottom setting, stock Dana 30/35 Alloy Axles w/ 4:88's, ARB AIR Lockers,Tera-Low T-Case,

Crawl Ratio is awesome, highway speed is comfortable at 70, I get 16 mpg both city/hwy (love that!)

you have the auto or 5 speed?

MA Wheeler 07-18-2012 09:44 AM

Quote:

Originally Posted by 97flexy

you have the auto or 5 speed?

5 speed, also get rid or the pulley fan and go electric, you'll pull higher revs, don't stop there, dump the exhaust manifold and go with a header and Cat Back exhaust too, you'll see a huge difference in your power range.

97flexy 07-18-2012 03:10 PM

Quote:

Originally Posted by MA Wheeler (Post 2596763)
5 speed, also get rid or the pulley fan and go electric, you'll pull higher revs, don't stop there, dump the exhaust manifold and go with a header and Cat Back exhaust too, you'll see a huge difference in your power range.

I have an electric fan and header already. I stuck with custom but with my TT I'm going to have to change that.

Redsand 07-20-2012 08:37 PM

1 Attachment(s)
Attachment 142719

Mine on 35s

COMPNZ8N 07-20-2012 08:53 PM

4.0L I6, stock gears, 4" ProComp w/ bodylift and 35" Dunlops.
http://i1246.photobucket.com/albums/...s/CAM_0093.jpghttp://i1246.photobucket.com/albums/...s/CAM_0082.jpghttp://i1246.photobucket.com/albums/...s/CAM_0080.jpghttp://i1246.photobucket.com/albums/...s/CAM_0078.jpg

Sahara707 07-20-2012 08:59 PM

3 Attachment(s)
2000 TJ, 3.5 Rubicon lift, 1" BL, 4.88 gears and 35" B.F. Goodrich M/T KM2.

97flexy 07-23-2012 08:31 AM

Quote:

Originally Posted by Redsand (Post 2606537)
Attachment 142719

Mine on 35s

What are the specs on your jeep? lift size, gears, trans, tires & BL if you have one

97flexy 07-23-2012 08:39 AM

updated picture for me(just about ride height, the rear should come down an inch)
http://img12.imageshack.us/img12/4749/gedc0084s.jpg

LeoLee 07-23-2012 03:25 PM

Nice pics everyone. Very inspiring. Seeing a lot of 4.88 gears for those 35"s and I'm thinking I'll do that when I get my 4" lift. I can't wait. Lol

Dougzin 07-23-2012 03:31 PM

Quote:

Originally Posted by COMPNZ8N
4.0L I6, stock gears, 4" ProComp w/ bodylift and 35" Dunlops.

Hows the stock axles and gears do with 35s?

Placemotorsports 07-23-2012 11:05 PM

Quote:

Originally Posted by Dougzin (Post 2614276)
Hows the stock axles and gears do with 35s?

I can chime in, they do fine around town but big rigs pass you on hills.

Redsand 07-24-2012 12:45 AM

Quote:

Originally Posted by 97flexy

What are the specs on your jeep? lift size, gears, trans, tires & BL if you have one

4in long arm, 1 in body, 5 speed, 4 10s, ford 8.8 rear, 30 front on dunlop mud rovers

Jcole231 07-24-2012 12:48 AM

Quote:

Originally Posted by Redsand

4in long arm, 1 in body, 5 speed, 4 10s, ford 8.8 rear, 30 front on dunlop mud rovers

Do u have problems with the gearing especially in 5th? I'm about to run almost the same set up but trying to decide if I should go with 4:56....?

Redsand 07-24-2012 12:52 AM

I had 33s before, so that's why I went 4 10s, but I had it on the interstate this past weekend and was running 75 and 80 with traffic with no problems

JPi1 07-24-2012 12:53 AM

06 rubi unlimited 5.5 rockrawler, fox, antitocks, walker Evans, Tom woods, 35" BFG KM 2s, 4.88s, on board air, all by JPi.

Jcole231 07-24-2012 12:56 AM

Quote:

Originally Posted by Redsand
I had 33s before, so that's why I went 4 10s, but I had it on the interstate this past weekend and was running 75 and 80 with traffic with no problems

Ok thanks, I actually ordered both sets of gears about 2 hours ago and when I saw ur post I was like......hmmm maybe I should cancel my order, lol

kylekae 07-24-2012 05:17 PM

Do most of you guy upgrade your inner axles to chromoly or even rcv. Or are stock inners OK.


All times are GMT -5. The time now is 10:39 PM.