Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Kentucky Jeep Forum (http://www.wranglerforum.com/f65/)
-   -   over my head (http://www.wranglerforum.com/f65/over-my-head-174438.html)

firedog327 07-17-2012 07:39 PM

over my head
 
3 Attachment(s)
Well guys just started my I 4 to I 6 swap I'll try to upload pic as I go. I've got engine, Trans,transfer case, and wiring harness in one complete unit so I hope everything goes as smooth as possible. I know it probably want. Anyway I started by taking off the 300lbs bumper that the PO made and installed had to beat it off with sledge hammers. Then removed the radiator and shroud.now in the progress of unhooking the wiring. Its hard enuogh messing with all efi ecm wiring cause I'm used to maybe half dozen wires in older models this is going to be a new experience for me.

Attachment 141885



Attachment 141885



Attachment 141888



Attachment 141890



Attachment 141891

firedog327 07-19-2012 04:53 PM

Well pulled the old 4 banger out yesterday, today changed out the wiring harness. I still got a lot to do just wish I'd waited for cooler weather to done all this work, temps in the high 90's and 100's. But wouldn't trade the experience for anything.

JeepAddOns-Chris 07-19-2012 05:04 PM

Best of luck. Swaps are always a massive undertaking!

firedog327 07-20-2012 11:19 AM

Everthing seems to be going fairly smooth right now. The old engine is out,the wiring harness change out pretty good. Now all I need to get is new motor mounts since the old ones were trashed and can't be reused. All the U-joints needs to be replaced as well. Thats what you get when you undertake a project thats 20years old.

firedog327 07-24-2012 06:32 PM

2 Attachment(s)
Well everything is going slow right now I've started cutting off the motor mount supports so they can be moved. As soon as I can buy a welder I can weld them back to mount my 4.0. Here are some more pic I took today so everyone can see how slow my progress is. Hope you enjoy them.

Attachment 143870



Attachment 143869

firedog327 08-17-2012 08:55 PM

Fyi I got my i6 in the other day had some problems with the wiring but had friend come over and in about four hrs fire it up and it purred like a kitten. I still got a few more minor things to due to it like getting my drivesafts put back and fixing the exhaust. But over all it been one hell of good time working on this project. I don't know why everbody saids it cost alot of money to do i4 to i6 swap all together I want have maybe $500 in the whole dam swap


All times are GMT -5. The time now is 12:54 AM.