Teraflex Quick Disconnect Bushing Removal
Working on installing Teraflex sway bar quick disconnects. The instructions say to push out the metal bushing on the bottom of the disconnect. I am having problems getting those bushings out. They simply won't move.
Anyone got any ideas on how to do this or what I am doing wrong?
Get a bigger hammer!:thumb:
I removed mine using a socket (same size as the bushing) on top of it and tapped it out using the a dead blow hammer. They will come out, they are simply tighter then shat. Once it starts to push out, flip the whole thing over and rest it on the socket and tap the shaft portion of the sway bar link, it will push it right out. Use a rubber mallet or a plastic dead blow hammer.
|All times are GMT -5. The time now is 06:51 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.