Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   New Hella E codes Loose (

scottywags 08-10-2012 11:27 AM

New Hella E codes Loose
I installed a set of the Hella ecodes last night and they are loose in the bucket. I've tightened them down as best I can and still they wiggle around.
I tried doing a search for that but nothing came up.
Has anyone else with these housing had this problem...if so how did you fix?


TnDz TJ 08-10-2012 11:35 AM

Make sure they are seated properly in the buckets. There are slots and tabs that align them

Ensure the screw tabs on the retaining rings are not bent inward. If anything, make sure they are bent up and away from the housing so they tighten up to the bucket.

loganw 08-10-2012 12:55 PM

Make sure they are seated correctly. Mine were a pain in the butt to get seated right while screwing the retaining ring in place.

All times are GMT -5. The time now is 12:02 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.