need help with clutch
I am working on a 78 cj7 with a 360, I've got it down to frame motor and I just put in a np435. Before I start putting everything back together and dropping the body back on is there a way I can test to see if its all hooked up correctly. My thought is that if I pull back on the shift fork with the transmission in gear that I should be able to turn the output shaft freely. This isn't happening. Did I miss something. Thanks.
|All times are GMT -5. The time now is 08:31 AM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.