Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Blower Mtr. (http://www.wranglerforum.com/f210/blower-mtr-18066.html)

kirkie 04-28-2008 01:39 PM

Blower Mtr.
 
I have a 99 TJ I just bought and can't get the blower to run on heat or a/c, it's not getting any fire to the switch. I checked all the fuses & relays I can find and there good. HELP don't want to go to a dealer !

Thanks:confused:

NY94YJ 04-28-2008 01:53 PM

I've read folks having trouble with the switch (dials) themselves...something about melting if memory serves. Replacing the switches fixes that.

There is a Resistor behined the glove box, they fail alot, but cause blower not to work on 1 or more of the low settings, Highest setting should work all the time becuase it is direct to battery.

There's threads on here about this. try search. And post up your solution!

Jerry Bransford 04-28-2008 02:10 PM

Is it dead on all speeds including the High-speed setting?

4.0l sahara 04-28-2008 02:25 PM

If it's onlydead on 1 or 2 speeds it could be the resister pack.

nater344 04-28-2008 02:26 PM

I have the same problem with mine...the switch only works on high. I've heard it usually isn't the switch. Is that correct? If so, is there a cheap solution?

NY94YJ 04-28-2008 02:29 PM

nater, your trouble is Def the resistor. not sure how much...should be under $50...i gotta do mine to, just havn't botherd yet.

Jerry Bransford 04-28-2008 03:56 PM

Quote:

Originally Posted by nater344 (Post 223392)
I have the same problem with mine...the switch only works on high. I've heard it usually isn't the switch. Is that correct? If so, is there a cheap solution?

Yep only working on the High speed is a clear indication it's the resistor pack. :)

Triple88a 04-28-2008 04:36 PM

Any one have the writeup in handy of how to use a relay on there? I remember seeing a write up of using large relays to eliminate this problem, but dont remember where since the last time some one discussed this was a while ago.

sflip09 04-28-2008 09:07 PM

Resistor
 
Exactly where is the resistor behind the glove box. My fan works on 1,3, and 4. Not 2 though.

kirkie 04-29-2008 01:34 PM

Quote:

Originally Posted by Jerry Bransford (Post 223389)
Is it dead on all speeds including the High-speed setting?

Yes it's dead on all speeds. Checked the fuses & relays on inside fuse panel & under the hood. Not getting any fire to switch.

Thanks


All times are GMT -5. The time now is 03:38 AM.