Jeep Wrangler Forum

Jeep Wrangler Forum (
-   On The Trail (
-   -   mud bogging (

MHjk 08-22-2012 01:53 PM

mud bogging
going to take the jk in real mud for the first time since the lift and tires. there is a nice event this saturday at our race track. im not locked so not expecting to do very much! ill post pics of the carnage when its all said and done!!! hopefully just a little muddy and no major damage.:punk::punk:

steve31 08-22-2012 02:11 PM

Good luck and watch out for your intake if its wetter mud. I changed my air filter yesterday and there was definitely some water that made it into the intake. I was only in puddles and mud that did not even make my running boards.

MHjk 08-22-2012 02:25 PM

thanks for the tip. ill go buy a new filter just in case it gets wet

MHjk 08-22-2012 07:41 PM

i also wanted to get peoples opinion about 4hi or low. most of the research says 4hi for wheel speed, seeing as i have an auto with 35's and 3.73 gears i can do 80k in 1st gear. i figure 4 low to get the 2 to 1 kick down which will still allow wheelspin and hopefully get the power to kick in

chase1472 08-22-2012 08:14 PM

Good luck have fun!

MHjk 08-25-2012 09:13 PM

great sucess, best run was mid 15 second pass, didnt win in my class but ended probably midway through it. she didnt get stuck either and kept on trucking through the pit. here are a few pics of the aftermath, there may be a video or two i can post later

InkMing 08-25-2012 10:17 PM


MHjk 09-02-2012 02:56 PM

here is a little video of my first pass, it was quite an easy pass the first round since there was more water than mud
medicine hat mud bog 2012 - 2011 jeep wrangler - YouTube

parrot 09-06-2012 09:24 PM

Great pic

InkMing 09-21-2012 08:07 PM

Not a bad run.

All times are GMT -5. The time now is 01:24 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.