Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Kicker Sub Wiring (http://www.wranglerforum.com/f274/kicker-sub-wiring-184669.html)

Elarson 09-03-2012 12:01 PM

Kicker Sub Wiring
 
Bought the recommended Kicker 10cvr82 2 ohm sub for the factory location in my 2012 JK with the upgraded infinity system. Can someone advise how to wire it with the factory wires once I cut the factory terminal off? I am not an audio guy and I found about four different wiring diagrams based on output of the amp and I have no idea.

Elarson 09-03-2012 06:09 PM

Quote:

Originally Posted by Elarson
Bought the recommended Kicker 10cvr82 2 ohm sub for the factory location in my 2012 JK with the upgraded infinity system. Can someone advise how to wire it with the factory wires once I cut the factory terminal off? I am not an audio guy and I found about four different wiring diagrams based on output of the amp and I have no idea.

Two whites and two greens with green. Which is plus and which minus and do they simply get stripped and attached to each of the four sub posts accordingly?? Someone has done this. Help!!!!

massbass22 09-03-2012 06:25 PM

Green is positive, white is negative

Elarson 09-04-2012 06:58 PM

For those that may do this you have two sets of green and white wires in the factory harness for the Infinity Sub. Simply clip the factory holders off and attach one green to the std positive on the sub and it's white partner to the std negative. The other pair goes to the positive marked with a dot and negative with a dot respectively.


All times are GMT -5. The time now is 10:01 AM.