Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Is this a d35 or d44 in rear? (http://www.wranglerforum.com/f282/is-this-a-d35-or-d44-in-rear-184792.html)

1jeeplvr 09-03-2012 08:36 PM

Is this a d35 or d44 in rear?
 
I have no tag????
http://i11.photobucket.com/albums/a1...903_213121.jpg
http://i11.photobucket.com/albums/a1...903_213111.jpg

jeepwayoflife 09-03-2012 08:39 PM

What the heck! It looks to be the shape of a Dana 35 but I have never seen a Dana 35 with a metal fill plug...

jeepwayoflife 09-03-2012 08:40 PM

1 Attachment(s)
Attachment 156864

little1989jeep 09-03-2012 08:40 PM

It looks like a Dana 35

1jeeplvr 09-03-2012 08:47 PM

Damn! I thought the 35 had a rubber plug

Imped 09-03-2012 08:49 PM

It's a Dana 35.....

Fill plug doesn't matter. It's very obviously a D35.

1jeeplvr 09-03-2012 09:02 PM

Quote:

Originally Posted by Imped (Post 2755000)
It's a Dana 35.....

Fill plug doesn't matter. It's very obviously a D35.

:confused: I felt like I won the lottery for a while there!

30-284 09-03-2012 09:34 PM

Thats an 8.25 rear end.

Donn

jeepwayoflife 09-03-2012 09:36 PM

Quote:

Originally Posted by 30-284
Thats an 8.25 rear end.

Donn

I think you can see the little "Dana " symbol though...

Imped 09-03-2012 09:40 PM

Quote:

Originally Posted by 30-284 (Post 2755165)
Thats an 8.25 rear end.

Donn

I considered that as well but I still think it's a D35. The diff cover just doesn't look like that from an 8.25.

UnlimitedLJ04 09-03-2012 09:44 PM

Quote:

Originally Posted by Imped (Post 2755196)
I considered that as well but I still think it's a D35. The diff cover just doesn't look like that from an 8.25.

and you can see the Dana symbol etched into the cover. bet if the OP cleaned it off you could read the PN's on the cover....

http://industryfigure.com/berkeley/J...er_dana35c.jpg

Imped 09-03-2012 09:48 PM

Quote:

Originally Posted by UnlimitedLJ04 (Post 2755214)
and you can see the Dana symbol etched into the cover. bet if the OP cleaned it off you could read the PN's on the cover....

I was trying to be as subtle as possible with my 'diff cover' statement. :D

30-284 09-20-2012 08:04 AM

Measure the axle tube, as the 35 has 2 3/4" tube and the 8.25 has 3" tube.

Donn

Rolf 09-20-2012 08:41 AM

It is definately a Dana 35, no need to measure anything. The earlier non c-clip D35s had differential covers with metal fill plugs. Original Dana D35 covers can even be bought new with metal fill plugs.


All times are GMT -5. The time now is 12:38 PM.