Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   P1391 code fixed 97 wranglet (

Wrangler5000 09-05-2012 03:19 PM

P1391 code fixed 97 wrangler
I have been searching for a fix on my daughters 97 Wrangler 4 cyl auto for awhile. Not sure if this was a prexisting problem, due to the fact i just bought this Wrangler with a bad engine and it had been sitting for 3 years. I Replaced the motor myself with a remanufactured engine. Pretty easy job if you have all the tools. So it runs well, no missing but the check engine light repeatedly coming on after a few miles, code read 1391 which is the cam sensor or crankshaft sensor not sensing. Replaced both, still not fixed.

Got to the Point it was time for a professional assessment of the problem. Took it to a small local shop I felt comfortable with. The tech said the 1391 was caused by a loss of communication with those sensors above 1500 rpm's. He just needed to find out why.

While trouble shooting it, he noticed the distributor has excessive lateral play in the distributor shaft. Only had 71 K miles on it.He Installed a remanufactured distributor. Problem fixed. California smog passed also. So happy.

All times are GMT -5. The time now is 11:53 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.