Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Jeep Interior Plastic (http://www.wranglerforum.com/f282/jeep-interior-plastic-18607.html)

Levinoss 05-18-2008 03:52 PM

Jeep Interior Plastic
 
Anyone know what type of plastic it is? I can't seem to find any information on it.

(Yes I am about to start a interior paint project)


~Lev

activelydying 05-18-2008 03:56 PM

I picked up some paint made for just plastics at the Advanced when I painted my dash and so far it's holding up well.

activelydying 05-18-2008 03:57 PM

I know that doesn't answer your question, but just thought I would mention that. :D

silvergoat 05-18-2008 04:21 PM

Quote:

Originally Posted by Levinoss (Post 230264)
Anyone know what type of plastic it is? I can't seem to find any information on it.

(Yes I am about to start a interior paint project)


~Lev

Yes, its made in Mexico and its called Plasticero.:rofl:

Levinoss 05-18-2008 04:31 PM

Quote:

Originally Posted by activelydying (Post 230267)
I know that doesn't answer your question, but just thought I would mention that. :D

Not really but thanks for the information!

Reason I want to know the type of plastic is so I can read up on it instead of just throwing on some primer and paint and keeping my fingers crossed the paint won't just fall in a day or two.

~Lev

Jma20a 05-18-2008 04:42 PM

as long as you sand it good and put a good quality primer you should be all set, make sure you find a paint made for painting plastic.

Vector6 05-18-2008 04:43 PM

glue down some blue astroturf... :D

Levinoss 05-18-2008 04:45 PM

Quote:

Originally Posted by Jma20a (Post 230297)
as long as you sand it good and put a good quality primer you should be all set, make sure you find a paint made for painting plastic.

For the interior plastic I was wondering what grit should be used and how much should be sanded?

Quote:

Originally Posted by Vector6 (Post 230299)
glue down some blue astroturf... :D

No gonna happen EVER


~Lev

Jma20a 05-19-2008 11:40 AM

start with a coarse grit and then move up to a finer grit, if it is too smooth from sanding the paint might not hold to great.


All times are GMT -5. The time now is 08:45 PM.