Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Control arms (http://www.wranglerforum.com/f210/control-arms-187050.html)

oneguy 09-14-2012 04:52 PM

Control arms
 
The adjustable control arms I have are bumping into frame after I pulled out my lift. I want to install oem arms, I see the upper ca brackets, but don't see the lowers. Where do they mount?

Thanks for any help

RubiCobra 09-14-2012 05:01 PM

More info needed. What kind of lift did you remove (and for the love of god why)?

Was it a long arm kit? OEM Lower control arm brackets might have been removed.

Pics help

98 tj sport 09-14-2012 05:08 PM

What kind of cas are they I might be interested in buying the set if u sell them, hell I have a complete oem suspension in my shed, coils shocks, cas, and sway bar links I would trade for them

doclouie 09-14-2012 05:15 PM

Yeah I am in the same boat. I have all those stock parts just sitting in the garage collecting dust.

oneguy 09-14-2012 05:20 PM

1 Attachment(s)
It is a long arm kit, the lift was from RC, and being my dd, I hated how it rode. I think the cas are from RC but not sure. I'm saving up for a new lift, but for now the ride is better.

oneguy 09-14-2012 05:23 PM

1 Attachment(s)
Btw was a 4" lift if that matters

Imped 09-14-2012 05:40 PM

Your ride wasn't bad due to height. It was bad due primarily to the RC shocks. Your factory lower mounts are gone so if you want to swap back to stock length arms, you'll need to fetch some universal mounts and weld them onto the frame in the correct spots and orientation. With the axle centered and at ride height, as long as you've got a stock arm available that'll fill in the blank of where to put the mount.

oneguy 09-15-2012 04:51 PM

Thanks for the help


All times are GMT -5. The time now is 05:35 AM.