Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Classifieds Archive (http://www.wranglerforum.com/f135/)
-   -   Rokmen High Clearance TT - Pre-order Sale! (http://www.wranglerforum.com/f135/rokmen-high-clearance-tt-pre-order-sale-18883.html)

dave@rokmen 05-29-2008 08:27 PM

Rokmen High Clearance TT - Pre-order Sale!
 
We are starting production of our High Clearance TT's. Save some $'s and lock yours in by pre-ordering.

-1/4" High Grade Steel
-Aprox 2.25" Additional Clearance Over Stock

Transmission and Engine Skid Plate will be available Mid July 08.

Stock
http://www.rokmen.com/products/skid_...y_skid/bp1.jpg

ROKMEN High Clearance
http://www.rokmen.com/products/skid_...y_skid/bp2.jpg

More info here:
http://www.rokmen.com/products/skid_...tank_skid.html

You can order using the link above, or by calling us @ 303-907-6303

Scout 05-29-2008 11:09 PM

Damn that's sexy! Almost makes me want to go back to short arms. :D:D:D

MoA 05-30-2008 12:00 AM

=p luckily im staying short arms.. ill be getting one of these later this summer after my sye..

i am LOVING the riddler diff covers btw dave :punk:

dave@rokmen 05-30-2008 02:38 PM

Scout - Long Arms are so 2000... :)

4point 05-30-2008 10:03 PM

Sweet, your product line is growing faster than my wallet. :D

MoA 05-31-2008 02:30 AM

Quote:

Originally Posted by 4point (Post 233549)
Sweet, your product line is growing faster than my wallet. :D

started back up my summer work today =D ill definably will be getting some stuff for my jeep this summer =D

we are coating a majority of jails/prisons this summer for the state.. hard work but very nice pay =D

Unlimited 05-31-2008 03:33 AM

Very nice... Will it work with my Jeep Medic oil pan skid?

dave@rokmen 05-31-2008 07:39 PM

It probably will, you will have probably have to drill 2 new holes onto our skid as I don't know if our engine skid mount holes will be in the same place Medics is.

It may not be optimal, but it should work.

dave@rokmen 05-31-2008 07:40 PM

Quote:

Originally Posted by 4point (Post 233549)
Sweet, your product line is growing faster than my wallet. :D

If all goes according to plan here you are going to need a second job.. :)

4point 06-01-2008 03:59 PM

Quote:

Originally Posted by dave@rokmen (Post 233719)
If all goes according to plan here you are going to need a second job.. :)

Need any electrical work done? Maybe we can trade. :D

dave@rokmen 06-04-2008 05:31 PM

OFFER UPDATE - IMPORTANT:

There have been allot of questions concerning our Engine Skid; and will there be a package price for the two pieces together and should people wait until the engine skid is available so they don't spend more money buying each piece seperately via the pre-order sales.

Very good question - and concern... So to help:

If you get in on this pre-order sale to purchase our TT, and then want an Engine Skid when the pre-order opens up we will discount the engine skid the difference in the package price. So if both pieces were available today, and your intent would be to purchase both right now, then you won't be left hanging, or feeling like you would have gotten a better deal by waiting. However; you have to call us and order the engine/transmission skid when it is released for pre-orders, it's not an open ended timeframe.

dave@rokmen 06-05-2008 09:49 PM

A few more pictures to wet the wistle....

A better comparison to Stock:
http://www.rokmen.com/products/skid_...y_skid/bp4.jpg

And a few mounted, and in Moab.

http://www.rokmen.com/products/skid_...y_skid/bp5.jpg

http://www.rokmen.com/products/skid_...y_skid/bp6.jpg


Thanks BR...

Scout 06-06-2008 12:09 AM

Quote:

Originally Posted by dave@rokmen (Post 233470)
Scout - Long Arms are so 2000... :)

Damn. How did I miss this jab? :crash:

Dave, you suck. :flipoff: :D:D:D

Nice skid plate though. :D

dave@rokmen 06-17-2008 07:46 PM

And a few more pictures we recently took. For those with Rubicons you can see how the locker pumps mount back in relatively stock location, only up and protected inside the new TT.

http://www.rokmen.com/products/skid_...y_skid/bp7.jpg

http://www.rokmen.com/products/skid_...y_skid/bp8.jpg

http://www.rokmen.com/products/skid_...y_skid/bp9.jpg

distortedtj 06-20-2008 12:32 PM

thank you for the detailed pic's dave. I'll be getting ahold of you in a few weeks when i get back from playing war in wisconsin.

Also could I bother you for some detailed pictures of your sliders and how the mount up and protect the under body of the tub ?

thanks.

dave@rokmen 06-20-2008 07:18 PM

Just FYI - looks like we are about 2 weeks out now.

dave@rokmen 06-20-2008 07:20 PM

The only pictures we have readily available are the ones on our website.

But I know there have been so many pictures taken of them and posted on forums - that a little searching may uncover what you are looking for.

If not give us a call and I'll do my best to explain it.

Team 15 06-22-2008 06:43 PM

the plate
 
Please let me know when you have plates them ready to ship I'm getting both


Thx

dave@rokmen 07-11-2008 11:38 AM

TT skid plates will start shipping eaarly next week - and we have a few left un-spoken for.


Full Transmission/Engine Skids are almost ready.

myblack89yj 07-12-2008 03:20 PM

would one of these work with my yj?

tazmann910 07-16-2008 10:18 AM

I will be intrested when the full transmission/ engine skids are ready.

Quote:

Originally Posted by dave@rokmen (Post 244751)
TT skid plates will start shipping eaarly next week - and we have a few left un-spoken for.


Full Transmission/Engine Skids are almost ready.


myblack89yj 07-20-2008 12:24 AM

not to be a dick to you rokmen boys but what about my answer?? I'm really interested and no answer yet, what the hell??

dave@rokmen 07-23-2008 08:55 PM

Quote:

Originally Posted by myblack89yj (Post 247673)
not to be a dick to you rokmen boys but what about my answer?? I'm really interested and no answer yet, what the hell??

Last I checked, the information on the website still says 03-06 TJ/LJ's.. ;)

dave@rokmen 07-23-2008 08:57 PM

Taz - this link maybe of interest..

http://www.wranglerforum.com/tj-jeep...tml#post248817

myblack89yj 07-24-2008 06:12 PM

i didnt bother to check the site since the ad was posted here.

dave@rokmen 07-29-2008 09:59 PM

understood..


All times are GMT -5. The time now is 10:55 PM.