Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   2" ADD-A-LEAF to a 1.5" Lift Spring (http://www.wranglerforum.com/f218/2-add-a-leaf-to-a-1-5-lift-spring-189924.html)

pinky51575 09-28-2012 07:52 PM

2" ADD-A-LEAF to a 1.5" Lift Spring
 
I picked up a add a leaf a few months back but found out I couldn't use it due to a broken spring. So now I have a 1.5" lift spring set and a set of add a leafes and wanted to know if any one ever combined them or know what height could be obtained from this. They are both black diamond springs. I don't think it will be a full 3.5" but maybe a 2.5" or 3" lift.

camarozz 09-29-2012 10:45 AM

Personally, Im not fond of add a leafs. They may not be the same spring rate, they may not fit in the stack very well, it changes the action of the original set of springs and the like. But it can be used and you will get some added height from it.

What is the add a leaf? Do you know its rating and what if any "lifting" its supposed to do?

I would doubt an add a leaf would add another 1.5" to that BD, and if it does it will put a strain the BD springs.

pinky51575 09-30-2012 11:53 AM

Decided not to add the leaf to the springs it was a pain enough to put on the springs without repacking.


All times are GMT -5. The time now is 04:12 PM.