Jeep Wrangler Forum

Jeep Wrangler Forum (
-   CJ General Discussion Forum (
-   -   1 piece AMC 20 bearings (

FDWheelin 10-10-2012 08:05 PM

1 piece AMC 20 bearings
I just bought some 1 piece AMC 20 axle shafts but they did not come with the bearings or anything else. What all do I need as far as bearings, etc. go and where can I get it?

sledn8r 10-10-2012 08:21 PM

when bought mine through 4 wheel parts, they came with all the bearings, new backing plates and everything. I suggest calling them. Mine were the G2, what type did you get?

FDWheelin 10-10-2012 09:03 PM

I bought them from a well known Jeep parts store down here in the springs called FN Jeep. This guy has a warehouse with every Jeep part known to man. I got the set for $75 so it was a good deal. Now I just have to deal with the pain of finding all the do-dads that go along with them. Maybe 4 wheel parts can sell just the bearings and what not that go with it.

sledn8r 10-10-2012 09:15 PM

I would imagine they can. I know Fn Jeep well. I bought a header, radiator, tires and wheels, and also a set of big axles from him for my 82 cj. Good company right there. Did you ask him, him might know or be able to order what you need.

FDWheelin 10-10-2012 09:28 PM

You DO know him well! Yeah he said check with superior and he named another company that I can't remember. I just found a bearing kit on for the AMC 20 one piece narrow track for $39.99 for one side. If you don't mind taking a look, is this all the stuff that came with your axles? Bearing Repair Kit (For One Side Only) 7086K

sledn8r 10-10-2012 09:42 PM

Yes, I believe so. Nice jeep by the way. Well what I could see from you one photo on your profile. I am out for awhile as I have a wicked piston slap. Planning on rebuilding the 258 here in the next month. Good luck with the axle swap. I also put on a cheap lunchbox locker in mine when I did my swap and love the locking.

sledn8r 10-10-2012 09:57 PM

You may also want to google instructions on it. There should be stuff in either some jeep magazines or utube or something. Looking at that, they should go through parts needed.BUT, I think that was all I needed.

jrussblues 10-11-2012 01:45 PM

Yep, you will need bearings, bearing spacers, inner seals and outer seals.

FDWheelin 10-11-2012 06:21 PM

Thanks. My plan was a locker after the axle swap. What locker did you go with?

Cj7otr 10-11-2012 07:27 PM

I put in a Detroit the same time I upgraded to the AMC 2 piece.

FDWheelin 10-11-2012 09:26 PM

Detroit seems to be what I hear a lot. Are you happy with it as far as trail function? I'm not too worried about on the road because I very rarely drive my rig on the road other than to get to the trail.

jrussblues 10-12-2012 11:59 AM

I was gonna run a lock rite but alas I was cursed with a factory trakloc :-(

gcaughron 10-12-2012 04:14 PM

Your local NAPA will have everything you need.

FDWheelin 10-13-2012 10:03 AM

Ah good old NAPA. I didn't even think about them. Thanks.

sledn8r 10-13-2012 03:43 PM

I actually. did the power trax no slip. Figured I would spend the big money when I did the big axle upgrade ina few years. So far, I like it. DId not install one in the front, when that time comes, it will be a selectable.

All times are GMT -5. The time now is 04:14 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.