Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Communications and Electronics (http://www.wranglerforum.com/f40/)
-   -   Amp working but speakers and sub dont (http://www.wranglerforum.com/f40/amp-working-but-speakers-and-sub-dont-195997.html)

LouieDelTorchio 10-28-2012 11:52 AM

Amp working but speakers and sub dont
 
So lets start out with what I have.
Headunit: Pioneer DEH-3200UB
Soundbar Speakers: 6.5" Polk DBs
Subwoofer: JL 10" in custom box
Amp: Jensen 760 watt 4 channel

I hooked up the amp, got a good ground, power and remote. Green light is on. Put the two sets of RCAs in, R/SUB to channel 3 and 4 because i am bridging those channels. Then i ran another set of RCAs from the front to channels 1 and 2 for the speakers up top. I have channels 1 and 2 set to full and 3 and 4 to Low. Im getting no sound from the speakers or sub. Im not sure what i did wrong. I tried messing with the headunit setting but it didnt seem to work. On the way to starbucks today i was listening to my front speakers running off my headunit, but i started hearing a really quiet sound from the speaker above me. Any advice would be very appreciated!

Hardheadedgoat 10-28-2012 12:03 PM

Id hit craigslist and get a better brand of amp ive never had luck with the cheaper brands.. I have an infinity bass link in my tj n it quit so I thought it was the amp or rca cables turns out it was the cheap stereo that I had

LouieDelTorchio 10-28-2012 12:10 PM

I got it for free so i wasnt expecting much haha


All times are GMT -5. The time now is 11:32 AM.