The thing that I don't particularly like about this position is that every time I put the soft top up or down, I have to take the extinguisher out. Also it's not exactly terribly handy for a fire on my Jeep. If I was helping someone else out - not a problem. I'm open to better ideas.
Thx guys, looks like I am going with he smithybuilt holder for the rollbar. Cheers and thx for posting : D
11-09-2012 01:57 AM
You will want it where you can get at it FAST !! If you have to get out and run around to the rear tailgate and open the door.....ohhhhh wait, it's locked, run back get the keys out, run back to the tailgate....open the door get it out, now ya gotta open the hood...
Get the picture???? Big melted blob on the road...
Yea, I have a nice Halon , but it's still in the back in the milk crate with everything else.
So my Jeep will have a melt down before I can get at it.
I need to find a place for it too.... "BH"
In the a two door I have mine mounted on the roll cage beside the drivers seat. If I need it in a hurry I simply slide my seat back and have instant access to it. Its been there for about a year now and does not interfere with the seat nor rear passengers.
(dont forget we drive on the right side of the road so drivers side is the right side)
I see a lot of guys with top quality refillable all metal extinguishers. That makes me proud. No junk for Jeep guys. If it may need to save a life, don't go cheap. I have two in mine. One is ABC powder and the other is clean propellent Halotron, both 2.5lb. Amerex.
11-09-2012 03:40 AM
I didn't think you could get Halon extinguishers any more (due to the harmful effect they have on the atmosphere) though I know it is still used for such places as turbine extinguishers on planes and such, but not for general purpose use??
Yep mine will be easy accessible strapped to the roll cage. ; )
11-09-2012 10:00 AM
I know you want it where you can grab it quickly but mounting high up on a roll bar is not a really good idea. If you get in an accident and that thing gets loose its a large heavy missle. Unless you only mount it up high when your wheelin.
12-04-2012 12:41 PM
What make is this ??
Originally Posted by rockhard426
3 Stainless Steel hose clamps Mounted in back with factory mount cost me about $4 at home depot :
I Tye wrapped mine to the drivers seat frame. Just be sure it is secure, so it will not come loose and get under your pedals.
12-04-2012 01:20 PM
I used to have mine strapped around the main rollbar right below my red lightbar.. velcro makes straps that are about an inch wide that are very durable and can keep things in place extremely well. This is how I keep all of my equipment attached to the jeep. Lol. You can get them at Lowes..
12-04-2012 09:51 PM
Originally Posted by Mullicamick
What make and model
extinguisher is this ??
The one I have mounted on my roll bard above is a Hal Guard 2.5 Clean Agent :
Not Cheap cost me about $115
H3R Performance | HG250R - Halotron Fire Extinguisher - Red
If you are in a wreck, those little plastic pop-tab holders are going to turn your fire extinguisher into a missile. You need something that holds it all the way around... the roll-bar velcro holder looks like the best of the bunch in this thread...