Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Exterior Door Handles (http://www.wranglerforum.com/f218/exterior-door-handles-197432.html)

Normus 11-04-2012 02:05 PM

Exterior Door Handles
 
Hello Everyone,
I know there has got to be at least a few write ups on this site regarding the removal of the exterior door handles, but I was hoping someone could point me in the direction of one more directly geared to a 95 with zero luxury features. I don't know if it makes a difference or not, but I will try to get a picture of the door, as seen from the inside, to upload here.

Thanks

jokerchief462 11-04-2012 11:00 PM

From the inside you will see two wedges that hold it tight to the door panel along with the hookup for linkage. They have like a serrated edge on them.

Normus 11-10-2012 03:28 PM

Quote:

Originally Posted by jokerchief462 (Post 2961039)
From the inside you will see two wedges that hold it tight to the door panel along with the hookup for linkage. They have like a serrated edge on them.

That helped me to get them off, thanks so much!

When I order the replacement ones, how do
I put them on? I have tried to get the old ones back on, as a means of practice, but it is proving quite difficult.

jokerchief462 11-10-2012 04:35 PM

Yeah it was difficult to say the least but a little patience something I don't have. If I remember correctly it took me like an hour too figure that out

Take look here just posted by jokerandthief great writeup
"Gaucho" CJ stepside pickup build - Page 67 - JeepForum.com

Normus 11-11-2012 10:54 AM

Quote:

Originally Posted by jokerchief462 (Post 2979971)
Yeah it was difficult to say the least but a little patience something I don't have. If I remember correctly it took me like an hour too figure that out

Take look here just posted by jokerandthief great writeup
"Gaucho" CJ stepside pickup build - Page 67 - JeepForum.com

That entire link was what I needed! Literally covered everything I wanted to do. Thanks so much.

Normus 12-01-2012 12:40 PM

So, in addition to some other things, I was able to get the exterior handle in, smooth as silk. I have it all set up, but it does not appear to be operating correctly. Any suggestions?


All times are GMT -5. The time now is 05:41 AM.