Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   General Jeep Discussion (http://www.wranglerforum.com/f19/)
-   -   Step One: Custom cut fenders (http://www.wranglerforum.com/f19/step-one-custom-cut-fenders-201829.html)

TheHexIsReal 11-26-2012 11:04 PM

Step One: Custom cut fenders
 
Seen a couple rigs do this a couple different ways and thought Id give it a shot and trim my fenders. Any tips, issues or ideas are welcome... Ill be recording my progress and trouble shooting as I go, step by step with pics for posterity... Off to auto zone at dawn!

Ianbeaulieu 11-26-2012 11:35 PM

Good luck! Im in the mood to build a rack lol

redrockerfan 11-27-2012 10:10 PM

Tape off both sides before you cut. Then paint the area that's going to be cut off with black primer to see the looks of it. if you don't like it you can re-tape it and wipe of the primer with paint reducer. Good luck

TheHexIsReal 12-06-2012 01:34 PM

1 Attachment(s)
Taped off "3 inches in, ready for the saw

TheHexIsReal 12-06-2012 01:38 PM

2 Attachment(s)
Ready for the grinder

TheHexIsReal 12-06-2012 01:44 PM

2 Attachment(s)
Grinder finished it off nicely! Looking a lot better

Ianbeaulieu 12-07-2012 02:57 AM

Looks good

LiftedTj 12-08-2012 07:14 AM

Looks good, all you need now is some black door edge molding to finish them off.

arevinotion 12-08-2012 09:13 AM

good luck. Good luck! Im in the mood to build a rack lol.thank you http://www.smecenter.net/aijie/images/5.gif


All times are GMT -5. The time now is 12:20 PM.